Contact us
  • E-mail:
  • Add:
    No.207 Fenglin Nan Road, Wujin Hi-tech Area, Wujin District, Changzhou
  • Tel:
  • Fax:
Home > Products > PV Junction BoxPV Junction Box
Solar Junction Box 4Rail,3Diodes,TUV,Pre-Potting (FT-G005)
    • Solar Junction Box (FT-G005)
    • Solar Junction Box (FT-G005)
    • Solar Junction Box (FT-G005)
    • Solar Junction Box (FT-G005)
    • Solar Junction Box (FT-G005)
MSN    Skype    Contact Us
Product Model:Solar Junction Box (FT-G005)


Product Features:

●    High current and voltage carrying capacity.

●    The connection of bus bar uses soldering mode.

●    The outer cover has the capacity of anti-aging and resistance to ultraviolet radiation.

●    It can be used in the outdoor iron environment.

●    It seals through glue, prevent water and dust. The protection grade is up to IP67.

 Solar Junction Box (FT-G005)Solar Junction Box (FT-G005)


Number of terminals 4
Number of diodes 3
Cable Spec 4~6mm2
Connection method Soldering
Weight 236(g)



Rated current 12A/15A
Rated Voltage 1000V
Operating Temperature -40℃ to 85℃
Protection Degree IP67
Protection Class Class II

Diode Surface Temperature Change Curve

Product certificate

The Solar Junction Box (FT-G005) is made of high temperature resistant plastic. It has good sealing, easy installation and wiring, dustproof, waterproof, anti-corrosion, flame retardant and so on. A Solar Junction Box (FT-G005) is used for solar modules. It protects solar panels from permanent damage caused by overvoltage, overcurrent and other induced surge voltages.


1, flexible multi-connection solution for input and output 2 to 6 series.

2, according to the new standard IEC61215, IEC61730, UL1703, with excellent heat dissipation and logic capacity, can reduce the internal temperature.

3, innovative seal, waterproof and dustproof design: IP65.

4, high-quality plastic material, in line with UL94-5VA weather resistance and UV resistance, suitable for long-term outdoor use.

Storage Conditions and Shelf Life:

Tinned copper ribbon should be stored in dry and ventilated room, where should be no acid, alkali, or harmful gas and the indoor relative humidity should not exceed 60%. Place it horizontally while stacking and avoid the carton extrusion, meanwhile, the stacking quantity of same product should
not exceed five layers or 1 ton. The shelf life can be up to six months since the production date.

  assembling  assembling  assembling





Immediately Consult

Message *
Name *
Verification code *
Designed by  Zhonghuan InternetCopyright © 2014 Changzhou Jinyin Futao Photoelectric Devices Co., LTD  Sitemap   苏ICP备09078805号-2